High-MW polyacrylamide in wastewater systems
Use this when your main question is how sludge dewatering and compliance-driven wastewater work change the type and make-down expectations.
Read the wastewater article
If you are choosing a polyacrylamide supplier for sludge dewatering, this SHN powder gives you a high-MW option built for faster floc formation, steadier settling, and more manageable cake dryness.
If you are comparing polyacrylamide manufacturers, verify MW, solid content, residual monomer, and dissolve time before you standardize a batch.
Use the three article paths and the product page together so you can match the charge type, process, and packing to the job you actually need to run.
| What to check | Why it matters | Review link |
|---|---|---|
| Wastewater sludge dewatering | Confirm the floc strength, settling speed, and cake dryness you need in municipal or industrial wastewater lines. | Review the wastewater article |
| Water-based drilling fluids | Check whether you need mud loss control, solids management, or viscosity support for drilling work. | Review the drilling article |
| Solid-liquid separation | Confirm if filtration stability and separation efficiency are the main reasons you are considering PAM. | Review the separation article |
| Packing and bag size | Match the package size and bag design to storage, transport, and batch handling on site. | Check the product page |
The SHN polyacrylamide powder is built for wastewater dewatering, drilling-fluid conditioning, and other solid-liquid separation jobs that need strong flocculation and controlled make-down time.
| Product name | SHN Brand Wastewater Treatment Use Polyacrylamide |
|---|---|
| SKU | 00173 |
| Molecular weight | 8-24 million |
| Solid content | ≥89% |
| Residual monomer | <500 ppm |
| Dissolution time | 45-60 minutes under controlled agitation |
| Ionic types | Anionic, cationic, and nonionic |
| Applications and packing | Wastewater treatment, drilling fluid conditioning, and solid-liquid separation; 25 kg and 1000 kg bags with custom bag design available. |
High-MW chains support bridging, settling, and more efficient sludge dewatering in plant use.
Anionic, cationic, and nonionic types make it easier to match the water chemistry and line requirement.
Bag formats and custom bag design support storage, transport, and steady make-down handling.
Each article below points to a different buying decision so you can compare the job, the process, and the type before you ask for a batch.
Use this when your main question is how sludge dewatering and compliance-driven wastewater work change the type and make-down expectations.
Read the wastewater article
Use this when mud loss control, solids handling, and water-based drilling performance are the deciding factors.
Read the drilling article
Use this when settling speed and filtration stability matter more than choosing a generic flocculant label.
Read the separation articleThese answers cover the practical choices buyers usually confirm before placing a polyacrylamide order.
Anionic, cationic, and nonionic options let you match the charge type to sludge condition and water chemistry instead of forcing one generic grade into every line.
Yes. It supports drilling-fluid conditioning and mud loss control in water-based systems.
It lists 25 kg and 1000 kg bags, and it also allows custom bag design when your storage or transport plan needs it.
The listed dissolution time is 45-60 minutes under controlled agitation, which helps plan make-down and dosing schedules.
Check molecular weight, solid content, residual monomer limit, dissolve time, and ionic type so you can compare material consistency and process fit.
When you need a product for sludge dewatering, solid-liquid separation, or drilling-fluid support and want a defined MW range with controlled batch handling.
