Paper Industry Wastewater
Fibre and filler recovery
Supports solid–liquid separation in paper mill effluent, where fine suspended solids are difficult to settle without a bridging polymer.
SHN-A1110 is a high molecular weight anionic polyacrylamide supplied as a dry, free-flowing powder, engineered to keep solid–liquid separation dependable in wastewater affected by high salinity or chloride levels. Applied as an anionic polyacrylamide flocculant, it strengthens particle bridging in sludge dewatering and industrial effluent treatment so flocs form quickly, settle evenly, and leave less load on downstream equipment.
SHN-A1110 is a synthetic, high molecular weight anionic polyelectrolyte in dry solid form. It is designed for robust solid–liquid separation where ionic strength varies, including saline groundwater and chloride-rich process water.
Wastewater treatment teams use SHN-A1110 to improve sludge dewatering and solid–liquid separation through enhanced particle bridging and stable floc formation. The powder dissolves predictably, which supports accurate dosing, repeatable results, and steadier operation in both batch and continuous dosing systems.
Published parameters for the SHN-A1110 grade. Confirm the exact variant and packing requirements with the supplier before ordering.
| Item | Specification | Note |
|---|---|---|
| Appearance | White powder or granule | Dry solid form suited to bulk dosing systems. |
| Solid content | ≥ 89% | High active content for consistent dosing. |
| Molecular weight | 16–18 million | High molecular weight grade for strong particle bridging. |
| Hydrolysis degree | 20%–25% | Anionic charge level as published for this grade. |
| Bulk density | 750 ± 50 kg/m³ | Typical powder handling density. |
| Viscosity | High | Produces relatively high viscosity solutions in water. |
| Residual monomer | ≤ 500 ppm | Stated to support environmental safety compliance. |
| Insoluble matter | 0.2% max | Low insoluble content for cleaner solutions. |
| Dissolving time | 45–60 minutes | Consistent particle size distribution supports uniform dissolution. |
| pH value (0.1% solution) | 7.0–8.0 | Measured on a 0.1% solution. |
| Storage period | 24 months | Store in a cool and dry place. |
Specifications are reproduced from the published product data for SHN-A1110. Values such as viscosity and dissolving behaviour depend on make-up water quality, concentration, and mixing conditions.
The published application list for SHN-A1110 covers several industrial wastewater streams, plus mineral processing and sludge handling duties.
Fibre and filler recovery
Supports solid–liquid separation in paper mill effluent, where fine suspended solids are difficult to settle without a bridging polymer.
Metal-bearing effluent
Helps flocculate fine particulate matter in steel plant wastewater so clarified water and compact sludge are easier to manage.
Colour and solids removal
Used in textile and dyeing effluent treatment, where stable floc formation improves separation of suspended solids from the process water.
Organic load control
Assists in clarifying aquaculture water by bridging organic and inorganic particles into settleable flocs that can be removed downstream.
Tailings and thickening
Applied in mineral processing circuits to improve settling and thickening performance where high-solids slurries must be handled consistently.
Solid–liquid separation
Improves dewatering of sludge by stabilising flocs, which is stated to reduce downstream equipment load and disposal costs.
SHN-A1110 ships in export-ready packaging. Bag design can be produced according to client requirements.
Packing options: 25 kg and 1000 kg bags. Bag design can be produced according to client requirements. Store in a cool and dry place; the stated storage period is 24 months.
Three practical reasons buyers review this grade for saline and chloride-impacted wastewater duties.
Engineered for robust solid–liquid separation in environments impacted by high salinity or chloride concentrations, and for systems that demand consistent performance under variable ionic strength.
Enhanced bridging effects and repeatable floc formation are stated to reduce polymer consumption, downstream equipment load, and disposal costs while supporting environmental compliance.
Consistent particle size distribution supports uniform dissolution and stable viscosity, while 25 kg and 1000 kg packaging and a 24-month storage period suit industrial and export logistics.
Send your wastewater stream, target application, and required quantity. The supplier can confirm the suitable grade, packing options, and lead time for your project.
Keep adjacent product options together for a faster catalog comparison.
Professional-grade cationic polyacrylamide designed for industry sludge dewatering. Reliable polyacrylamide manufacturer offering high-weight flocculant.
View product
Ensure optimal sludge dewatering with our cationic polyacrylamide powder. As a reliable polyacrylamide manufacturer, we provide consistent, high-grade solutions.
View product
Source high-performance polyacrylamide from a leading polyacrylamide manufacturer. Optimize solid-liquid separation and mineral processing with our powder.
View productshn-a1110 is a synthetic, high molecular weight anionic polyelectrolyte supplied as a dry, free-flowing powder. it is designed for robust solid–liquid separation in wastewater systems affected by high salinity or chloride concentrations.
the published application list covers paper industry wastewater treatment, steel industry wastewater treatment, dyeing industry wastewater treatment, aquaculture wastewater treatment, mineral processing use, and sludge dewatering with solid–liquid separation.
the published specification includes solid content of at least 89%, molecular weight of 16–18 million, hydrolysis degree of 20%–25%, residual monomer of 500 ppm or less, insoluble matter of 0.2% maximum, and a ph of 7.0–8.0 in a 0.1% solution.
the listed dissolving time is 45–60 minutes. a consistent particle size distribution supports uniform dissolution rates and stable viscosity profiles, which helps with accurate dosing.
it is supplied in 25 kg and 1000 kg bags, with bag design available according to client requirements. store the product in a cool and dry place; the stated storage period is 24 months.
send your intended application, expected consumption, and required quantity through the contact page so the supplier can respond with pricing, packing options, and lead time.
